add mpv conf

mpv/.config/mpv/input.conf

@@ -0,0 +1,214 @@
+
+## Seek
+
+WHEEL_UP           seek     5
+WHEEL_DOWN         seek    -5
+RIGHT              seek     5
+LEFT               seek    -5
+Shift+RIGHT        seek     1  exact
+Shift+LEFT         seek    -1  exact
+Ctrl+LEFT          seek    -60
+Ctrl+RIGHT         seek     60
+PGUP        add    chapter  1
+PGDWN       add    chapter -1
+
+## Volume control
+
+UP          add volume  5 
+DOWN        add volume -5
+VOLUME_UP   add volume  5
+VOLUME_DOWN add volume -5
+
+
+# mpv keybindings
+#
+# Location of user-defined bindings: ~/.config/mpv/input.conf
+#
+# Lines starting with # are comments. Use SHARP to assign the # key.
+# Copy this file and uncomment and edit the bindings you want to change.
+#
+# List of commands and further details: DOCS/man/input.rst
+# List of special keys: --input-keylist
+# Keybindings testing mode: mpv --input-test --force-window --idle
+#
+# Use 'ignore' to unbind a key fully (e.g. 'ctrl+a ignore').
+#
+# Strings need to be quoted and escaped:
+#   KEY show-text "This is a single backslash: \\ and a quote: \" !"
+#
+# You can use modifier-key combinations like Shift+Left or Ctrl+Alt+x with
+# the modifiers Shift, Ctrl, Alt and Meta (may not work on the terminal).
+#
+# The default keybindings are hardcoded into the mpv binary.
+# You can disable them completely with: --no-input-default-bindings
+
+# Developer note:
+# On compilation, this file is baked into the mpv binary, and all lines are
+# uncommented (unless '#' is followed by a space) - thus this file defines the
+# default key bindings.
+
+# If this is enabled, treat all the following bindings as default.
+#default-bindings start
+
+#MBTN_LEFT     ignore              # don't do anything
+#MBTN_LEFT_DBL cycle fullscreen    # toggle fullscreen on/off
+#MBTN_RIGHT    cycle pause         # toggle pause on/off
+#MBTN_BACK     playlist-prev
+#MBTN_FORWARD  playlist-next
+
+# Mouse wheels, touchpad or other input devices that have axes
+# if the input devices supports precise scrolling it will also scale the
+# numeric value accordingly
+#WHEEL_LEFT    add volume -2
+#WHEEL_RIGHT   add volume 2
+
+## Seek units are in seconds, but note that these are limited by keyframes
+#UP    seek  60
+#DOWN  seek -60
+# Do smaller, always exact (non-keyframe-limited), seeks with shift.
+# Don't show them on the OSD (no-osd).
+#Shift+UP    no-osd seek  5 exact
+#Shift+DOWN  no-osd seek -5 exact
+# Skip to previous/next subtitle (subject to some restrictions; see manpage)
+# Adjust timing to previous/next subtitle
+#Ctrl+Shift+LEFT sub-step -1
+#Ctrl+Shift+RIGHT sub-step 1
+# Move video rectangle
+#Alt+left  add video-pan-x  0.1
+#Alt+right add video-pan-x -0.1
+#Alt+up    add video-pan-y  0.1
+#Alt+down  add video-pan-y -0.1
+# Zoom/unzoom video
+#Alt++     add video-zoom   0.1
+#Alt+-     add video-zoom  -0.1
+# Reset video zoom/pan settings
+#Alt+BS set video-zoom 0 ; set video-pan-x 0 ; set video-pan-y 0
+#PGUP add chapter 1                     # skip to next chapter
+#PGDWN add chapter -1                   # skip to previous chapter
+#Shift+PGUP seek 600
+#Shift+PGDWN seek -600
+#[ multiply speed 1/1.1                 # scale playback speed
+#] multiply speed 1.1
+#{ multiply speed 0.5
+#} multiply speed 2.0
+#BS set speed 1.0                       # reset speed to normal
+#Shift+BS revert-seek                   # undo previous (or marked) seek
+#Shift+Ctrl+BS revert-seek mark         # mark position for revert-seek
+#q quit
+#Q quit-watch-later
+#q {encode} quit 4
+#ESC set fullscreen no
+#ESC {encode} quit 4
+#p cycle pause                          # toggle pause/playback mode
+#. frame-step                           # advance one frame and pause
+#, frame-back-step                      # go back by one frame and pause
+#SPACE cycle pause
+#> playlist-next                        # skip to next file
+#ENTER playlist-next                    # skip to next file
+#< playlist-prev                        # skip to previous file
+#O no-osd cycle-values osd-level 3 1    # cycle through OSD mode
+#o show-progress
+#P show-progress
+#i script-binding stats/display-stats
+#I script-binding stats/display-stats-toggle
+#z add sub-delay -0.1                   # subtract 100 ms delay from subs
+#Z add sub-delay +0.1                   # add
+#x add sub-delay +0.1                   # same as previous binding (discouraged)
+#ctrl++ add audio-delay 0.100           # this changes audio/video sync
+#ctrl+- add audio-delay -0.100
+#9 add volume -2
+#/ add volume -2
+#0 add volume 2
+#* add volume 2
+#m cycle mute
+#1 add contrast -1
+#2 add contrast 1
+#3 add brightness -1
+#4 add brightness 1
+#5 add gamma -1
+#6 add gamma 1
+#7 add saturation -1
+#8 add saturation 1
+#Alt+0 set window-scale 0.5
+#Alt+1 set window-scale 1.0
+#Alt+2 set window-scale 2.0
+# toggle deinterlacer (automatically inserts or removes required filter)
+#d cycle deinterlace
+#r add sub-pos -1                       # move subtitles up
+#R add sub-pos +1                       #                down
+#t add sub-pos +1                       # same as previous binding (discouraged)
+#v cycle sub-visibility
+# stretch SSA/ASS subtitles with anamorphic videos to match historical
+#V cycle sub-ass-vsfilter-aspect-compat
+# switch between applying no style overrides to SSA/ASS subtitles, and
+# overriding them almost completely with the normal subtitle style
+#u cycle-values sub-ass-override "force" "no"
+#j cycle sub                            # cycle through subtitles
+#J cycle sub down                       # ...backwards
+#SHARP cycle audio                      # switch audio streams
+#_ cycle video
+#T cycle ontop                          # toggle video window ontop of other windows
+#f cycle fullscreen                     # toggle fullscreen
+#s screenshot                           # take a screenshot
+#S screenshot video                     # ...without subtitles
+#Ctrl+s screenshot window               # ...with subtitles and OSD, and scaled
+#Alt+s screenshot each-frame            # automatically screenshot every frame
+#w add panscan -0.1                     # zoom out with -panscan 0 -fs
+#W add panscan +0.1                     #      in
+#e add panscan +0.1                     # same as previous binding (discouraged)
+# cycle video aspect ratios; "-1" is the container aspect
+#A cycle-values video-aspect-override "16:9" "4:3" "2.35:1" "-1"
+#POWER quit
+#PLAY cycle pause
+#PAUSE cycle pause
+#PLAYPAUSE cycle pause
+#STOP quit
+#FORWARD seek 60
+#REWIND seek -60
+#NEXT playlist-next
+#PREV playlist-prev
+#MUTE cycle mute
+#CLOSE_WIN quit
+#CLOSE_WIN {encode} quit 4
+#E cycle edition                        # next edition
+#l ab-loop                              # Set/clear A-B loop points
+#L cycle-values loop-file "inf" "no"    # toggle infinite looping
+#ctrl+c quit 4
+#DEL script-binding osc/visibility      # cycle OSC display
+#ctrl+h cycle-values hwdec "auto" "no"  # cycle hardware decoding
+#F8 show_text ${playlist}               # show playlist
+#F9 show_text ${track-list}             # show list of audio/sub streams
+
+# Apple Remote section
+#AR_PLAY cycle pause
+#AR_PLAY_HOLD quit
+#AR_CENTER cycle pause
+#AR_CENTER_HOLD quit
+#AR_NEXT seek 10
+#AR_NEXT_HOLD seek 120
+#AR_PREV seek -10
+#AR_PREV_HOLD seek -120
+#AR_MENU show-progress
+#AR_MENU_HOLD cycle mute
+#AR_VUP add volume 2
+#AR_VUP_HOLD add chapter 1
+#AR_VDOWN add volume -2
+#AR_VDOWN_HOLD add chapter -1
+
+#
+# Legacy bindings (may or may not be removed in the future)
+#
+#! add chapter -1                       # skip to previous chapter
+#@ add chapter 1                        #         next
+
+#
+# Not assigned by default
+# (not an exhaustive list of unbound commands)
+#
+
+# ? add sub-scale +0.1                  # increase subtitle font size
+# ? add sub-scale -0.1                  # decrease subtitle font size
+# ? cycle angle                         # switch DVD/Bluray angle
+# ? cycle sub-forced-only               # toggle DVD forced subs
+# ? cycle program                       # cycle transport stream programs
+# ? stop                                # stop playback (quit or enter idle mode)